7 Simple Tips to Keep Your Bed on Wheels From Rolling

Have you ever dreamt of a magical castle, only to be jolted awake by the unwelcome sensation of your bed rolling across the room? If so, you’re not alone. Beds on wheels, while convenient for rearranging furniture or cleaning, can become a real nightmare when they decide to take a midnight cruise.

A good night’s sleep is crucial for our health and well-being. But a constantly rolling bed disrupts that precious sleep, leaving us feeling tired, frustrated, and even injured in some cases.

Several factors can contribute to a rolling bed, including:

  • Uneven floors: Older homes or those with uneven subfloors can cause the bed to rock and potentially roll.
  • Pets: Our furry friends can sometimes use the bed as a launching pad, propelling it across the room.
  • Worn-out wheels: Over time, casters on a bed can wear down, losing their ability to swivel smoothly and increasing the chance of rolling.
  • Loose wheels: Improperly attached wheels can become loose, causing the bed to wobble and potentially roll.

Luckily, there are several simple solutions to keep your bed firmly planted and your sleep undisturbed. This guide will explore 7 effective strategies, from readily available tools to creative DIY solutions, to finally stop your bed from rolling.

1. Wheel Locks: Engage the Brakes on Your Bed

The most straightforward solution is to utilize wheel locks. These ingenious little devices essentially act as brakes for your bed’s casters, preventing them from swiveling or rolling.

Types of Wheel Locks:

  • Built-in Locks: Some beds come equipped with built-in locking mechanisms on the casters themselves. Look for a lever or button on the side of the caster that you can press to engage the lock.
  • Add-on Locks: If your bed doesn’t have built-in locks, worry not! There are a variety of add-on wheel locks available commercially. These typically come in a pack and can be easily attached to the existing casters. Look for options that match the size and type of your bed’s casters.

Using Wheel Locks:

  • Built-in Locks: Refer to your bed’s manual or manufacturer’s website for specific instructions on activating the built-in locks.
  • Add-on Locks: Installation instructions for add-on locks will typically be included in the package. These often involve snapping the lock onto the caster or securing it with a screw or bolt.

Pros of Wheel Locks:

  • Effective: Wheel locks are a highly effective solution, completely stopping the bed from rolling.
  • Easy to Use: Built-in locks are simply a matter of flipping a lever, and add-on locks are generally straightforward to install.
  • Variety of Options: There are locks available for most caster types and sizes.

Cons of Wheel Locks:

  • Cost: Depending on the type and quality, add-on wheel locks can range in price.
  • Aesthetics: Some may find the appearance of add-on locks unappealing.

2. Furniture Grippers: Increase Friction for a Non-Slip Solution

If you’re looking for a solution that doesn’t involve modifying your bed’s wheels directly, furniture grippers offer a fantastic alternative. These handy devices are essentially small pads made from a high-friction material that are placed under the feet or wheels of furniture to increase the grip between the furniture and the floor.

Types of Furniture Grippers:

  • Material: Grippers come in a variety of materials, each with its own advantages:
    • Rubber: These provide excellent grip on most floor surfaces and are quite durable.
    • Felt: Felt grippers are gentler on delicate floors like hardwood but may not offer as much grip as rubber.
    • Silicone: Similar to rubber, silicone grippers offer good traction and are often transparent, making them less noticeable.
  • Shape: Furniture grippers are available in various shapes, including round, square, and rectangular. Choose a shape that best fits the size and shape of your bed’s casters.

Applying Furniture Grippers:

Most furniture grippers come with an adhesive backing, making application simple. Just ensure the floor and casters are clean and dry before applying. Press the gripper firmly onto the bottom of the caster or furniture leg.

Pros of Furniture Grippers:

  • Easy to Use: Furniture grippers are very easy to apply and remove without damaging your floor or furniture.
  • Versatile: Grippers can be used on various furniture pieces besides beds, making them a multi-purpose solution.
  • Variety of Options: The wide range of materials and shapes allows you to choose the grippers that best suit your needs and floor type.

Cons of Furniture Grippers:

  • Effectiveness: While effective on most surfaces, grippers may not completely stop a bed with very worn-out wheels or on particularly uneven floors.
  • Durability: Depending on the material and usage, furniture grippers may need to be replaced periodically.

3. Strategic Bedding Placement: Pin Your Bed Against the Wall

Sometimes, a simple change in bed placement can significantly reduce rolling. If your bedroom layout allows, consider positioning your bed with the headboard or footboard snug against a wall. This creates a physical barrier that helps prevent the bed from rolling away.

Pros of Strategic Placement:

  • Cost-Effective: This solution requires no additional materials or tools.
  • Effective: When done correctly, it can completely stop the bed from rolling in one direction.

Cons of Strategic Placement:

  • Limited Application: This method only works if your bedroom layout allows for the bed to be placed against a wall.
  • Aesthetics: Depending on the size of your room and bed, placing it against a wall might limit accessibility or create an aesthetically unappealing layout.

4. Non-Slip Rugs

Another great way to increase friction and stop your bed from rolling is to place a non-slip rug under the wheels. This provides an additional layer of grip between the bed and the floor.

Choosing the Right Rug:

  • Size: Select a rug that is large enough to cover the area where the bed’s wheels rest. Ideally, the rug should extend slightly beyond the perimeter of the bed frame for maximum effectiveness.
  • Material: Opt for a rug with a non-slip backing, such as rubber or silicone. Woven rugs with a textured surface can also provide additional grip.

Positioning the Rug:

Place the rug on the floor where you intend to have the bed positioned. Ensure the non-slip backing is making good contact with the floor surface. Make any necessary adjustments to the rug’s position to ensure the bed’s wheels rest entirely on the rug.

Pros of a Non-Slip Rug:

  • Effective: A non-slip rug can be a very effective solution, especially for beds with moderately worn-out wheels or on smooth floors.
  • Multi-Functional: The rug can add warmth and style to your bedroom in addition to preventing your bed from rolling.

Cons of a Non-Slip Rug:

  • Cost: Depending on the size and quality, purchasing a non-slip rug can involve some additional cost.
  • Upkeep: Rugs may require regular cleaning and maintenance depending on the material and usage.

5. DIY Caster Cups

For the crafty and budget-conscious, a DIY solution can be a fun and effective way to stop your bed from rolling. Here are two creative ideas for DIY caster cups:

  • Tennis Ball Trick:

This is a simple and cost-effective method. Here’s what you’ll need:

  • Tennis balls (enough for each bed caster)
  • Sharp knife or box cutter
  • Optional:  Hot glue gun


  1. Carefully cut a slit in the side of each tennis ball, large enough to fit the bed caster.
  2. Place the tennis ball over the caster, with the slit facing upwards.
  3. (Optional)  For added security, use a hot glue gun to secure the tennis ball around the base of the caster.
  • Furniture Coaster Conversion:

This method requires slightly more effort but offers a more permanent solution.


  • Furniture coasters (enough for each bed caster, choose a size slightly larger than the caster diameter)
  • Sharp knife or utility blade
  • Heavy-duty scissors (optional)
  • Hot glue gun


  1. Using the knife or scissors, carefully cut a small hole in the center of each furniture coaster.
  2. Tip:  Ensure the hole is large enough to comfortably fit the bed caster stem.
  3. Place the furniture coaster over the caster, with the hole aligned with the stem.
  4. Use the hot glue gun to secure the furniture coaster to the base of the caster.

Pros of DIY Caster Cups:

  • Cost-Effective: This solution utilizes readily available materials, making it a budget-friendly option.
  • Customization: You can choose tennis balls or furniture coasters that complement the style of your bed frame.

Cons of DIY Caster Cups:

  • Effectiveness: The effectiveness of DIY caster cups can vary depending on the severity of the rolling issue and the materials used. Tennis balls may not be as durable as furniture coasters, especially for heavier beds.
  • Durability: Tennis ball cups may need to be replaced more frequently due to potential wear and tear.
  • Aesthetics: The appearance of DIY caster cups might not be as aesthetically pleasing as some other solutions.

6. Double-Sided Tape (For the Slightly Rolling Bed)

For beds that exhibit minimal rolling tendencies, double-sided tape can be a quick and easy solution. This method works best on smooth, hard floors like tile or hardwood.

Choosing the Right Tape:

  • Strength: Opt for a double-sided tape with strong adhesive properties to ensure it can hold the weight of the bed and prevent rolling.
  • Surface Compatibility: Select a tape specifically designed for the type of floor you have (e.g., tape for hardwood floors).

Applying Double-Sided Tape:

  • Clean the Floor: Ensure the floor surface where you intend to place the tape is clean, dry, and free of dust or debris.
  • Apply the Tape: Cut strips of double-sided tape and strategically apply them in a grid pattern underneath the bed frame, focusing on areas where the wheels make contact with the floor.
  • Position the Bed: Carefully place the bed on top of the applied tape, ensuring the wheels rest firmly on the taped areas.

Pros of Double-Sided Tape:

  • Easy to Use: This method requires minimal effort and can be implemented quickly.
  • Cost-Effective: Double-sided tape is a relatively inexpensive solution.

Cons of Double-Sided Tape:

  • Effectiveness: This method is only suitable for beds with minimal rolling issues. It may not be effective for heavier beds or on uneven floors.
  • Removal: Removing double-sided tape can sometimes be challenging and might leave residue on the floor surface.
  • Durability: Over time, the adhesive properties of the tape may weaken, requiring reapplication.

7. Replace the Casters (For Persistent Rolling)

If none of the above solutions effectively address your rolling bed problem, it might be time to consider replacing the casters themselves. Here’s what you need to know:

Choosing Replacement Casters:

  • Size: Measure the diameter and stem length of your existing casters to ensure you purchase replacements that fit properly.
  • Material: Consider the type of floor you have and your needs. Here are some common options:
    • Nylon Casters: These are a good all-around choice for most floor types and offer a good balance of affordability and durability.
    • Polyurethane Casters: These offer quieter operation and are gentle on delicate floors like hardwood.
    • Locking Casters: As the name suggests, these casters have a built-in locking mechanism to completely prevent rolling.

Replacing the Casters:

Replacing the casters might require some basic DIY skills or the help of a handyman. Consult your bed’s manual or manufacturer’s website for specific instructions on removing and replacing the casters. Generally, the process involves unbolting the existing casters and attaching the replacements.

Pros of Replacing Casters:

  • Effectiveness: Replacing worn-out or unsuitable casters with new ones can be a permanent solution to rolling problems.
  • Improved Functionality: You can choose casters with features like locking mechanisms or quieter operation to enhance the overall functionality of your bed.

Cons of Replacing Casters:

  • Cost: Depending on the quality and type of casters you choose, this can be the most expensive solution.
  • DIY Skills: Replacing casters might require some basic tools and skills. If you’re not comfortable doing it yourself, you’ll need to hire a handyman, adding to the cost.


A good night’s sleep is vital for our health and well-being. Don’t let a rolling bed disrupt your sleep! This guide has provided you with several solutions, from simple fixes like furniture grippers to more involved options like replacing the casters. Evaluate your situation, choose the solution that best suits your needs and comfort level, and finally get a good night’s sleep in a stationary bed!


Q: My bed rolls because the wheels are worn out. Is replacing the casters my only option?

A: Not necessarily! Depending on the severity of the wear and tear, some of the other solutions might still be effective. Furniture grippers or a non-slip rug can offer additional grip and prevent rolling with slightly worn casters. However, if the wheels are significantly damaged or no longer swivel smoothly, replacing them is the best course of action for a long-term solution.

Q: My floor is uneven, and that’s what’s causing my bed to roll. What can I do?

A: Uneven floors can definitely contribute to a rolling bed. Unfortunately, there’s no one-size-fits-all solution for uneven floors. Here are some approaches to consider:

  • Small Unevenness: If the unevenness is minor, furniture grippers or a non-slip rug might be enough to create sufficient friction and prevent rolling.
  • Larger Unevenness: For more significant unevenness, consider placing shims under the bed frame on the lower side(s) to level it out. Shims are thin wedges made of wood or plastic and can be found at most hardware stores.
  • Professional Solutions: In cases of severe floor unevenness, consulting a professional contractor for floor leveling might be necessary.

Q: My pet likes to jump on the bed, and that makes it roll. What can I be done?

A: Pets can definitely add an element of unpredictability to the bed-rolling situation! Here are some suggestions:

  • Train Your Pet: Teaching your pet alternative ways to get on and off the bed, such as using stairs or a ramp, can help minimize the impact on the bed’s movement.
  • Strategic Placement: If possible, position the bed away from walls or furniture that your pet might use as a launching pad.
  • Combine Solutions: Consider using a combination of methods, like furniture grippers or double-sided tape, along with pet training for a more comprehensive approach.

Q: I’m worried about using some of these solutions damaging my floor. What are some things to keep in mind?

A: It’s a valid concern! Here are some tips to minimize the risk of damaging your floor:

  • Furniture Grippers: Choose grippers made from a soft material like felt for delicate floors like hardwood.
  • Double-Sided Tape: Opt for tape specifically designed for the type of floor you have. Test the tape on a small, inconspicuous area of the floor first to ensure it doesn’t leave any residue.
  • DIY Caster Cups: If using furniture coasters for DIY caster cups, ensure they have a smooth, non-marking bottom surface.

Remember: When in doubt, it’s always best to prioritize protecting your floor. Choose solutions specifically designed for your floor type or opt for less permanent options like furniture grippers or double-sided tape if you’re concerned about potential damage.